This cart-mounted Eddy Current Inspection System offers the operator the capability to inspect small lots of parts by hand on a mobile platform. Occurring in real time, inspections can be performed to verify part geometry, chemistry or hardness. The Pro Series Profiler is used to inspect parts; it is capable of profiling parts with either noncontact or contact eddy current probes and then displaying these profiles on a computer screen. The inspection system automatically calculates the part accept/reject limits from a review of 10 good parts during a “learn” process. These limits can then be adjusted by the operator, as required, to represent the characteristics of the ideal virtual part. The system’s memory is capable of storing the learned profiles from any number of parts, as well as the part profiles themselves. This information can then be downloaded from the system via USB or Ethernet ports mounted on the monitor stand.