Test & Inspection
Case Study

CNC Manufacturing Company Aims for Precision Automated Inspection

It was time to refine the quality inspection system beyond the mostly manual process.

March 1, 2013

2A Armament, located in Boise, Idaho, is a CNC manufacturing company that works in the firearms and defense industries as well as medical, prosthetic, motorsports, semiconductor and outdoor recreation markets. In 2009 they entered the firearm component manufacturing business, knowing their machines could manufacture these precision parts. After a couple years of successful automated production, they wanted to refine their quality inspection even more, beyond the mostly manual process. Since some of their parts had up to 120 gage points to measure, they wanted a faster, more automated system of measurement.

2A Armament focuses on the manufacturing side, so their clients can concentrate more on product innovation. With only eight employees, their shop was built around a more automated and lean approach to manufacturing, allowing the machines to do most of the manual and tedious labor. And with it taking operators a day to measure just two to three parts with manual gages such as pins, calipers and height gages, they knew they needed a different solution for quality inspection.

Since 2A Armament was already familiar with the Zeiss brand, especially from sports optics, they decided to look at Carl Zeiss coordinate measuring machines (CMMs). They wanted a system that could inspect an entire firearm if needed, and they also wanted one that had the extras they needed without having to add more at additional cost. After comparing various systems, they purchased a Contura G2 7/10/6 with Calypso metrology software. Another reason for choosing this was because of the Calypso direct interface with their CAD model software, SolidWorks.

“Being able to physically see where the machine should be probing, and then translating that onto a part is great,” says Ryan Jacobson, production supervisor and part owner at 2A Armament. “The Calypso software is refined and intuitive. What was once a programming headache is now made easy in the inspection process.”

2A Armament is using the Contura G2 for first article, in-process and final inspections. Their production process is based off of client specified acceptable quality level (AQL) sampling plans, but they go beyond that in their own internal inspection process during product manufacturing. 2A Armament’s part sizes range from large, square parts up to 15 inches long to small, round parts about 1.5 inches long by 1 inch in diameter. A typical tolerance for them is ±5 thousandths of an inch, and their tightest tolerance is +5 tenths, -zero. A lot of their parts are complex, with about 90 points of inspection each.   

“With the Contura we’ve reduced inspection time by at least 80%, and our employees can now focus on program optimization, building work fixtures for the next job or improving other processes,” says Ryan.

Now, 2A Armament is able to inspect 20 to 30 parts per day.

The Zeiss system has also allowed 2A Armament to more accurately monitor their machine tool wear, and check parts for their customers. As they do their sampling plan, they can accurately track tool wear over the length of production.

“An operator can feel that a pin is tight. But, how tight is it? How close is it to being out of spec? Now we know,” says Ryan. Also, by comparing the print, CAD model and product, they can easily find any measurement discrepancies for their customers. “This aspect really helps us improve our customer relationships. Some examples of challenging measurements for customers include large radiuses or small bores.”

2A Armaments has been very happy with the support and service from Carl Zeiss. “Whether it’s learning more about parts for probing, or a simple question on a software application, Carl Zeiss has been a great team to work with,” says Ryan. “Response timeliness is especially critical when you’re working on a first article inspection and don’t have time to wait.”

Going forward, 2A Armament appreciates that they can easily add various probes or accessories to their Contura G2 as needed to have even more capability. An optical comparator head may be an option for the future, so they can measure small radiuses or parts they would otherwise have to cut in half to get measurements.

“Getting a new inspection system felt a bit daunting at first, but once you get into it, it’s simple,” says Ryan. “We have experienced a major productivity increase in all aspects of our operation, simply by automating our inspection with the Contura G2.”


  • With the Contura, 2A Armament estimates they have reduced inspection time by at least 80%.
  • The new system allows 2A Armament to more accurately monitor their machine tool wear.
  • As they do their sampling plan, they can accurately track tool wear over the length of production.


Carl Zeiss Industrial Metrology


Did you enjoy this article? Click here to subscribe to Quality Magazine. 

You must login or register in order to post a comment.




Karen Spencer, Clinkenbeard's quality manager, discusses what makes the plant stand out, advice for other plants, and looks to the future.
More Podcasts

Quality Magazine


2015 April

The April 2015 edition of Quality Magazine includes this years Quality's Professional of the Year.

Table Of Contents Subscribe

Topics to Talk About

What topics would you like to see Quality cover more?
View Results Poll Archive

Clear Seas Research

qcast_ClearSeas_logo.gifWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.


Facebook2015_40 twitter_40px.png  youtube_40px.pnglinkedin_40px.png  GooglePlus_40