Quality Magazine

X-Ray Inspection

October 3, 2007
The C-Arm Inspection System is for quality control imaging in the areas of casting process verification and product analysis for automotive component manufacturers. The system has an image intensifier coupled to a high-resolution high-bit-depth digital camera for real-time viewing and a programmable computer numerical controller (CNC) to manage part positioning. The system, which allows a full 30-degree angle of detection (tilt), handles scanning at obtuse angles. The system integrates into the production process and can be directly interfaced in a robotic manufacturing cell. Additional features include: image intensifier, amorphous silicon panel or LDA configuration; energy sources of 160 kilovolts, 225 kilovolts and 320 kilovolts; static or dynamic image viewing; image enhancement and archival system; a part envelope of 610 millimeters by 610 millimeters and 50-kilogram capacity; 30-degree (+ or -) tilt, 914 millimeters up/down motion; programmable or manual operation; US 21CFR1020.40, UVV, DIN54113, VDE-0-100, CE, EUATOM 96/29 and IEC 529 compliance.

VJ Inspection Systems
(631) 589-8800
www.vjt.com
Reply 71
Manual X-Y Scanner