Fluke Calibration announced the addition of three new models to its P3100 Hydraulic Deadweight Tester line of pressure calibrators. The new testers extend the P3125 oil-operated, dual PCU product line, allowing users to calibrate more devices with one instrument. The P3125XT-BAR measures from 1 to1200 bar, the P3125XT-KGCM2 from 1 to 1200 kgf/cm2, and the P3125XT-MPA from 1 to 120 MPa.
The P3100 Series is the culmination of more than 50 years of experience in the production and design of high-performance pressure standards. With features designed to improve accuracy and performance, increase reliability, and simplify operation, P3100 deadweight testers can calibrate a wide range of pressure-sensing device, including transducers, transmitters, or gauges.
Each instrument is supplied with a detachable lid, making it neat, compact, and easily portable. The weight masses are stored in a high-quality case with a self-locking mechanism to protect them during transit. All units are provided with an accredited calibration report; weight mass details; M14 x 1.5, M20 x 1.5, 1/8-inch, 1/4-inch, 3/8-inch and 1/2-inch NPT and BSP female adaptors; operating fluid (where applicable); and spare seals. The piston/cylinder assemblies are manufactured to the very highest standards and are provided standard with ISO/IEC 17025-accredited calibration reports.