NDT

NDT News: GE Inspection Technologies to Acquire phoenix|x-ray

October 3, 2007
BILLERICA, MA-GE Inspection Technologies has signed a definitive agreement to acquire phoenix|x-ray, a provider of high-resolution computed tomography (CT)/X-ray technology used in nondestructive testing (NDT) applications.
Read More

NDT News: Olympus NDT Honored by U.S. Military

October 3, 2007
WALTHAM, MA-Olympus NDT, provider of nondestructive testing solutions, has recently been honored by the Defense Supply Center Richmond (DSCR) as one of the U.S. government’s best suppliers at an Automated Best Value System award ceremony.
Read More

NDT News: Quality NDT Conference Call for Papers 2008

October 3, 2007
BENSENVILLE, IL-The inaugural Quality NDT Conference will take place in conjunction with the 10th annual Quality Measurement Conference 2008 and will be held at the Marriott Suites Clearwater Beach on Sand Key, Clearwater, FL, April 28 through May 1, 2008.
Read More

From the Editor: Adventures in NDT

October 3, 2007
My latest adventures of roving editor-at-large in the world have recently taken me to Québec City, Canada. Although I’ve been to Ukraine, the Czech Republic, Hungary, Germany, Austria, France, Italy, England and Spain, along with Ecuador, Argentina and Mexico, I had never actually been to see our neighbors to the north.
Read More

Tech Showcase: X-Ray Inspection Today

October 3, 2007
The use of X-ray-based nondestructive test methods dates back more than a hundred years, with the advent of film-based radiography. This article describes a number of X-ray-based offerings for today’s nondestructive testing applications.
Read More

A Revolution in 3-D Surface Metrology

October 3, 2007
Traditional measurement of surface texture using 2-D profilometers has major limitations. It gives satisfactory results for isotropic surfaces that present identical features regardless of the direction of measurement. The method also can be applied to some anisotropic surfaces in accordance with ISO 4288, such as turned surfaces with representative profiles that are perpendicular to tool marks. But it does not provide a general solution.
Read More

NDT Applications: Making Contact with Positive Material Identification

October 3, 2007
Quality procedures are put in place to document materials as they are received and as they move through the production process, but what happened to those raw materials before they arrived at the receiving dock? This was the problem facing St. Cloud, MN-based DCI Inc., a manufacturer of stainless steel and nickel alloy vessels and equipment.
Read More

Eight Leak Testing Tips

October 3, 2007
Must quality engineers and product managers always be at odds? The former seeks perfection while the latter pushes for greater throughput. With the latest improvements in leak detection devices, both agendas can be served, as the best examples of this testing equipment help speed the quality control process without sacrificing accuracy.
Read More

The Power of PCRT

October 2, 2007
Acceptable product performance is the ultimate goal of any manufacturer. This requires not only well-controlled material input and process control for making acceptable products, but also a way to ensure that, when products are used where failure could be dangerous or expensive, a screening method ensures the rejection of unacceptable products. Performance-based screening using NDT is an approach to guarantee that high-performance, quality parts are shipped to the customer.
Read More

Infrared Thermography Advances

October 2, 2007
Infrared thermography is the science of detecting and measuring variations in heat emitted by an object and transforming them into visible images. It is a rapidly developing technology for nondestructive testing (NDT) in many applications. Recent advances in imaging equipment allow for more rapid data acquisition and higher spatial resolution, thus opening up new areas of application.
Read More

Multimedia

Videos

Podcasts

 In honor of World Quality Month, we spoke to James Rooney, ASQ Past Chairman of the Board of Directors 2013, for his take on quality around the world.
For more information, read the ASQ Speaking of Quality column.
More Podcasts

THE MAGAZINE

Quality Magazine

cover_image

2014 April

Check out the April 2014 edition of Quality Magazine for features!
Table Of Contents Subscribe

Manufacturing Process

Has/does news about a manufacturers’ recall (like the GM recall in the news now) cause you or your company to reexamine its manufacturing process?
View Results Poll Archive

Clear Seas Research

qcast_ClearSeas_logo.gifWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

eNewsletters

STAY CONNECTED

facebook_40.png twitter_40px.png  youtube_40px.pnglinkedin_40px.png